Biosurfactants, enzymes, and microbes break down stubborn oil and carbon deposits on parts. Delivers outstanding results via soak-cleaning.
Parts Clean Powder is a powdered bio-cleaner that uses biosurfactants to lift stubborn oil and carbonized deposits from parts. Enzymes and microbes then break those contaminants down - ultimately into water and carbon dioxide. Soak-cleaning delivers powerful results on oil, grease, and carbonized residue without damaging the substrate. Certified under U.S. EPA Safer Choice (Safer Product Standards), it is an environmentally conscious cleaner, and the included rust inhibitor makes it safe to use on metal parts.
A three-stage process - biosurfactant → enzymes → microbes - breaks oil down into water and CO₂.
Oil, grease, and carbonized deposits are broken down through soak-cleaning without damaging the substrate.
Works for both soak-cleaning and machine cleaning - covering a wide range of maintenance scenarios.
The cleaning solution stays effective for 3 to 6 months. No frequent replacement needed - dramatically lower running costs.
Used solution can be discharged to the drain - reducing both disposal cost and environmental burden at the same time.
A rust inhibitor is included - metal parts can be soak-cleaned without concern for corrosion.
Certified under U.S. EPA Safer Product Standards, recognized for low impact on humans and the environment.
From automotive service to aviation, marine, and heavy-equipment maintenance - Parts Clean Powder is trusted across a broad range of industries dealing with oil and carbon contamination. Professional-grade cleaning, whatever your field.
Recommended dilution for soak-cleaning in a parts washer.
Dilute 500 g of powder with 20 L of water (or warm water) - ideal for soak-cleaning in a parts washer.
Heat → Soak → Brush — a simple workflow that breaks down carbonized oil deposits via microbial action. Fluid lasts 3–6 months and is drain-safe, enabling a low-waste cleaning cycle.
Use a heated parts washer or heater tank to bring the solution to roughly 50°C. At this temperature, microbes are most active, delivering peak oil and carbon removal performance.
Microbe ActivationImmerse parts in the warmed solution. Carbonized deposits that are slow and costly to remove with conventional methods are efficiently broken down by microbes and enzymes.
Soak CleaningAfter soaking, a light brushing removes loosened deposits — reaching fine carbon buildup and baked-on oil without damaging the substrate.
Substrate-Safe FinishDissolved oil is continuously broken down by microbes, so fluid and oil never separate. Service life of 3–6 months means fewer swaps and lower running costs.
3–6 Month Fluid LifeBeyond manual soak-cleaning, the fluid works with ultrasonic cleaners and pressure washers. A slight whitish finish on lifted parts comes from the rust inhibitor.
Machine-Wash ReadyAs a U.S. EPA Safer Choice certified bio-cleaner, spent solution can be discharged to the drain — dramatically cutting industrial waste costs and environmental impact.
Drain-Safe500 g : 20 L yields 40 L of cleaning solution, or up to 80 L from the full 1 kg. Ideal standard pack for soak-cleaning in a parts washer.
From automotive service to aviation and marine maintenance, Parts Clean Powder is trusted across industries facing tough oil and carbon contamination. One soak-cleaning solution for a wide range of parts-cleaning challenges.
Breaks down carbonized deposits on head covers, valves, pistons, and cylinder heads via soak cleaning - without damaging the substrate. Proven performance in engine rebuild and overhaul operations.
Cleans metal components fouled with cutting oil, grease, and lubricants. The rust inhibitor keeps corrosion at bay, making it ideal for post-machining finishing or pre-assembly prep cleaning.
Handles high-volume parts cleaning for used-vehicle service, restoration, and inspection work with excellent cost efficiency. A single batch of cleaning fluid runs for 3-6 months, dramatically cutting running costs.
Breaks down stubborn mud-and-oil contamination via microbial action. Ideal for scheduled maintenance and overhauls on construction equipment, agricultural machinery, and forklifts.
Precision cleaning for aircraft components and marine engine parts exposed to harsh environments. Rust inhibition improves post-cleaning storage and reduces salt-air corrosion risk.
Cleaning solution is drain-safe, dramatically cutting industrial waste disposal costs. A U.S. EPA Safer Choice certified bio-cleaner enabling sustainable service operations without compromise.
Reach out for samples, pricing, or trial support.