A medium-strength anaerobic sealant with PTFE for tapered pipe threads. Withstands temperatures up to 400°F (204°C). Resists leakage, vibration loosening, moisture, hydraulic fluids, and diesel fuels. Parts may be repositioned for up to 24 hours after application. 6 mL and 50 mL tube sizes.
Permatex High Temperature Thread Sealant (PTX-59214 / PTX-59235) is a medium-strength anaerobic sealant with PTFE for tapered pipe threads. The white creamy paste has high lubricating properties that prevent galling on pipe threads and fittings. Provides immediate low-pressure sealing and allows readjustment of fittings shortly after assembly. After 72 hours the joint is sealed to pipe burst pressure. Medium solvent resistance, withstands temperatures to 400°F (204°C). Parts may be repositioned for up to 24 hours after application. Not recommended for use on plastic piping.
Operating range extends well above the 565 grade. Withstands temperatures up to 400°F.
White creamy paste with PTFE has high lubricating properties that prevent galling on pipe threads and fittings.
Resists leakage, vibration loosening, moisture, hydraulic fluids, and diesel fuels.
Parts may be repositioned for up to 24 hours after application - leaving room for alignment adjustment after assembly.
Pick 6 mL (PTX-59214) for spot repairs and prototyping or 50 mL (PTX-59235) for production lines and shop stocking.
Remove oil, water, and any old sealant from both male and female tapered threads. Degrease with cleaner if needed.
Leaving the first thread free, apply a continuous bead around the male threads. For larger fittings, apply a thin film to the female threads as well.
Tighten with standard wrenches to the proper torque. Curing begins immediately as air is excluded.
Low-pressure leak testing can be performed immediately after assembly. Allow ~24 hours before high-temperature operation, and ramp temperature gradually on first start-up.
Source: Permatex official TDS (High Temperature Thread Sealant - 59214/59235), "FOR CLEANUP" section.
Source: Permatex official Technical Data Sheet (Permatex High Temperature Thread Sealant - 59214/59235), "TYPICAL APPLICATIONS" section, verbatim. Maximum recommended pipe size: 2" NPT (over 1" may require heat for disassembly).
Reach out for product information, quotes, or to source other Permatex grades.